Endurance 37
Project Boat
- Boat REF# · 261657
- LOA · 11.28m
- Year · 1980
- Construction · GRP
- Underwater profile · Long keel
- Berths · 6
- Engine · 1 x Diesel 48hp, Perkins 4108 (1988)
- Lying · Hayling Island
This boat is off the market but here are some boats that are still For Sale
Extra Details
Designer | Peter Ibold |
---|---|
Builder | Tyler |
Lying | Hayling Island |
Fuel capacity | 540.0 ltr Total - 2 Tanks |
Water capacity | 630.0 ltr Total - 2 Tanks |
Holding tank capacity | 181.0 ltr Total - 1 Tanks |
Mechanical
Engine | 1 x Diesel 48hp |
---|---|
Engine make and model | Perkins 4108 (1988) |
Engine Hours | Not Recorded |
Engine Cooled | Direct |
Steering | Wheel |
Drive | Shaft |
Prop(s) | 3 Blade prop |
Fuel consumption (approx) | 3.0 ltr /hour At Cruising Speed |
Engine spares |
---|
Dimensions
LOA | 11.28m |
---|---|
LWL | 8.47m |
Beam | 3.60m |
Draft Min | 1.62m |
Displacement | 9,042kg |
Storage | Ashore |
Rig
Sloop rigged Aluminium spars () with stainless steel standing rigging ()
Sails
Mainsail | - () |
---|---|
Headsail | - () |
Electrical Systems
12 volt battery, 4 batteries charged by: engine, solar panels, shore power
Construction
Construction | GRP |
---|---|
Underwater profile | Long keel |
Finish | Gelcoat finish |
Accommodation
Total # of berths | 6 |
---|---|
No. of double berths | 2 |
No. of single berths | 2 |
Cabin(s) | 1 |
Handbasin | 1 |
Shower | 1 |
Heads | 1 heads (Manual) |
Accommodation
Grill | |
---|---|
Oven | |
Refrigerator | |
Cabin heating | |
Pressurised water system | |
Hot water system | |
Non-Smokers |
Deck Gear
Sail cover | |
---|---|
Boathook | |
Swim Ladder | |
Instrument Covers |
Electric windlass
2 anchors
(CQR)
Nav Equipment
Compass | |
---|---|
Speed | |
Log | |
Wind |
Safety Equipment
LPG Detector | |
---|---|
Life buoys | |
Danbuoy | |
Horn |
3 bilge pumps (2 manual / 1 Electric)
Broker's Comments
The Endurance 37 has a proven design, robust construction and with a generous accommodation space this has made the Endurance 37 a popular choice amongst blue water sailors for nearly three decades.
This particular example has been out of the water for some time and the current owner has been slowly refurbishing her, but due to a change in circumstances the owner is not able to complete the full refurbishment as intended.
Below are details of some the work carried out by the owner and also a list of task required to complete her (as advised by the owner).
Work already undertaken includes:
All Internal furniture has been repaired / replaced along with new upholstery. All window seals replaced, saloon headlining replaced, plus some headlining in the cabin, cabin layout changed to double berth or seat with table, teak deck repaired where necessary, Stainless steel fuel tank repaired, but needs to be installed, all seacocks, engine, fridges, battery system and toilet have been checked over and all ok.
Work still required: Some of the Electronicsto be reconnected, navigation table surround needs completing and electrics panel needs to be re installed, starboard salon locker needs finishing, saloon and heads plumbing needs completing, mast and rigging needs to be checked and installed etc.
This Endurance 37 needs to be completed by someone with the vision required, so she can be back in the water where she belongs.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.